CERT^® Advisory CA-2000-12 HHCtrl ActiveX Control Allows Local Files to be Executed

A complete revision history is at the end of this file.

Systems Affected

I. Description

http://microsoft.com/technet/security/bulletin/ms00-037.asp

http://microsoft.com/technet/security/bulletin/fq00-037.asp

Preconditions Required for Exploitation

Unfortunately, the Microsoft patch does not address several significant ways in which the vulnerability can be exploited. The vulnerability can be exploited in any situation where all of the following conditions are met:

1. The attacker must entice or compel a victim who has Active Scripting enabled to open an email message or visit a web page. Alternatively, the attacker could attempt to trick the victim into opening the compiled help file, such as by sending it as an attachment in an email message. Since it is not yet widely recognized that help files have the potential to be just as dangerous as an untrusted executable, this may not be difficult.

2. The attacker must be able to place a malicious help file in a location accessible to the user when the Active Script is executed. The attacker must also be able to predict or guess the path to this file. If the patch described in Microsoft Security Bulletin MS00-037 has been applied, this file may not reside on a UNC share (\\hostname\path\file). That is, if the patch has not been installed, an intruder must be able to place a file anywhere that the victim can access it. If the patch has been installed, the intruder must be able to place a file anywhere that the victim can access it except on UNC shares.

3. The Active Script mentioned above must run in a security zone that allows ActiveX controls to run and allows the scripting of controls that are marked "safe for scripting." The default security settings for the Internet Zone and the My Computer zone allow these actions to occur without warning prompts.

4. The HHCtrl ActiveX control must be installed and be marked "safe for scripting" and "safe for initialization." This is the default configuration when Internet Explorer is installed.

Note that all of these conditions, some of which are default conditions, must be met in order for an attacker to exploit this vulnerability. Changing some of these conditions may involve trade-offs between functionality and security.

In recent discussions with the CERT/CC, Microsoft has not indicated any intention of changing the help system's behavior. Therefore, to be completely protected from exploitation of this vulnerability, users must eliminate one or more of the preconditions listed above.

It is reasonable for a user to expect that simply visiting a web page is a safe activity, so eliminating the first precondition is difficult. Disabling Active Scripting or the execution of ActiveX controls prevents the vulnerability from being exploited, but it also prevents the normal operation of these features and is likely to affect the appearance and functionality of web pages. Removing the "safe for initialization" or "safe for scripting" attributes of the HHCtrl causes warning dialogs to be generated in a number of circumstances where they may not be expected.

How an Attacker May Create "Local" Files

Although you may believe it is difficult or impossible for an intruder to place a file in a predictable location that is accessible to you, in fact, several common practices allow intruders to do just this.

While preventing an attacker from downloading files on the local system without warning is a valuable security practice, it is not sufficient as the single line of defense against the execution of malicious code. The CERT/CC recommends adopting one of several more conservative solutions, including disabling ActiveX controls or Active Scripting. More information on these solutions are included in the Solution section of this document.

If a site relies solely on limiting the attacker's ability to make malicious code accessible to the victim, the following activities are not safe:

• Sharing files via a network filesystem such as AFS, DFS, NFS, Novell Netware, or Windows shares when users map these drives to local drive letters. When the drive letter is not predictable but the path to the file is, the attacker may be able to make multiple exploit attempts because failed calls to showHelp generate no error messages. Access control lists cannot be used to defend yourself against this problem because the ACL facility allows the intruder to give you access to malicious files they control without your consent.

• Sharing physical disk drives in environments such as academic labs, Internet cafes, or libraries, where an attacker may be able to store malicious files in a writable local directory.

• Using any of several products that automatically extract attachments from email messages and place them in predictable locations. A notable example of this is Eudora.

• Using chat clients such as IRC-II, ICQ, or AOL Instant Messenger in modes that allow unsolicited file transfers to be placed in a local directory.

• Hosting an anonymous FTP site, if the upload directory is accessible by local users.

Without other solutions, engaging in any of these activities renders a site vulnerable to the problem described in this advisory. Additionally, several other vulnerabilities have been discovered recently whose impact was limited to the ability to download arbitrary files to the victim's system. If they are exploited in conjunction with this vulnerability, the impact is more significant, as discussed in the next section.

II. Impact

• The Active Scripting option

  Disabling Active Scripting is perhaps the best solution since it prevents the vulnerability from being exploited and doesn't present the user with warning dialogs. Setting this option to "Prompt" is not recommended, because the warning dialog will incorrectly imply that the action is safe, when in fact it is not.

• The Run ActiveX controls and plug-ins option

  Disabling the execution of ActiveX controls is an option that protects against this vulnerability, but it also prevents plug-ins from executing normally. Since plug-ins for common applications such as Adobe Acrobat are included in this same category, setting the option to "Disable" results in significantly reduced functionality. For similar reasons, setting this option to "Prompt" is not recommended, because it is not always clear what the safe response should be.

  An excellent solution (but perhaps requiring more administrative effort) is to set this option to "Administrator approved". In this setting, only those ActiveX controls approved by the administrator (using the Internet Explorer Administration Kit) will be executed. If the administrator includes most controls but specifically excludes the HHCtrl control, there is an attractive balance between security and functionality. For more information regarding this option, see

  http://www.microsoft.com/Windows/ieak/en/support/faq/default.asp

• The Script ActiveX controls marked safe for scripting option

  Disabling the scripting of ActiveX controls marked "safe for scripting" protects against this vulnerability but limits the normal operation of many controls used over the Internet. Setting this option to "Prompt" generates a warning dialog that is not strongly enough worded to reflect the danger inherent in the HHCtrl control.

If all three of these options are set to "Enable", which is the default in the Internet Zone, this vulnerability may be exploited. Improving the security settings of any of these three options will at least cause a warning dialog to appear and may prevent the exploit entirely.

Steps for changing your security zone settings for Internet Explorer 5 on Windows NT 4.0 are:

1. Start Internet Explorer as you normally would.
2. From the Tools menu select Internet Options.... The Internet Options dialog box appears.
3. Select the Security tab. The Security Options panel appears.
4. Select the zone you wish to change. For most users, this is the Internet Zone, but depending on your circumstances, you may need to repeat these steps for the Local Intranet Zone as well.
5. Click the Custom Level button. The Security Settings panel appears.
6. Change one or more of the following settings based on the information provided earlier and your desired level of security.
   1. Set Run ActiveX controls and plug-ins to administrator approved, disable, or prompt.
   2. Set Script ActiveX controls marked safe for scripting to disable or prompt.
   3. Set Active scripting to disable or prompt.
7. Click OK to accept these changes. A dialog box appears asking if you are sure you want to make these changes.
8. Click Yes.
9. Click Apply to save your changes.
10. Click OK to close the Internet Options dialog box.

Security zones can also be used to enable Active Scripting and ActiveX controls at specific sites where you wish to retain this functionality. To place a site in the Trusted Sites Zone using Internet Explorer 5.0 on Windows NT 4.0,

1. Start Internet Explorer as you normally would.
2. From the Tools menu select Internet Options.... The Internet Options dialog box appears.
3. Select the Security tab. The Security Options panel appears.
4. Select the Trusted Sites Zone.
5. Click the Sites... button.
6. Enter the name of the trusted site in the Add this Web Site to the zone: text box.
7. Click the Add button.
8. If a dialog box appears saying "Sites added to this zone must use the https:// prefix. This prefix assures a secure connection":
   1. Click OK.
   2. Add https:// to the beginning of the site name, and try to add the site again.
   3. Or uncheck the box at the bottom of the dialog box marked Require server verification (https:) for all sites in this zone. Making this change reduces the security of your system by not requiring certificate based authentication, relying instead on DNS based verification which could be misleading. The CERT/CC encourages you not to make this change unless you fully understand the implications. If you choose not to require certificate based verification, you may wish to reduce other security settings for the Trusted Sites Zone.
9. Click OK to save the new list of sites.
10. Click Apply to save your changes.
11. Click OK to close the Internet Options dialog box.

Steps for managing Security Zones in other versions of Windows and Internet Explorer are similar.

The "My Computer" Zone

In addition to the four zones that are ordinarily visible, there is a fifth zone called the "My Computer" zone which is not ordinarily visible. Files on the local system are in the "My Computer" zone. You can examine and modify the settings in the "My Computer" through the registry. For more information, see

http://support.microsoft.com/support/kb/articles/Q182/5/69.ASP

The "My Computer" zone may also be managed through the Internet Explorer Administration Kit (IEAK).

The CERT/CC does not recommend modifications to the "My Computer" zone unless you have unusual security requirements and a thorough understanding of the ramifications, including the potential for loss of functionality.

Note, however, that if there is a vulnerability or condition that allows an attacker to create a file locally (such as through Eudora, for example) then this file will be subject to the security settings of the "My Computer" zone.

Active Scripts on a web page or in a mail message will continue to be subject to the security settings of the zone where the web page or mail client resides. In this case, disabling Active Scripting in untrusted locations, including the Internet Zone, provides the best defense.

Change the attributes of the HHCtrl ActiveX control.

Because the HHCtrl control is central to the exploitation of this vulnerability, removing either the "safe for scripting" or the "safe for initialization" attribute in the registry corrects the problem. Unfortunately, removing these attributes prevents some features of the help system from operating normally, even if the help file is opened through some other application.

Implementing this solution will allow other ActiveX controls to function, including those referenced in Internet web pages. If you are unable to implement one of the solutions mentioned earlier, or you are willing to sacrifice help system features for more complete ActiveX functionality, then you may wish to consider this solution. This solution will provide warning dialogs when users open help files -- both malicious and benign help files.

To mark the HHCtrl ActiveX control as not "safe for scripting", remove this registry key:

HKEY_CLASSES_ROOT\CLSID\ {ADB880A6-D8FF-11CF-9377-00AA003B7A11}\ Implemented Categories\ {7DD95801-9882-11CF-9FA9-00AA006C42C4}

To mark the HHCtrl ActiveX control as not "safe for initialization", remove this registry key:

HKEY_CLASSES_ROOT\CLSID\ {ADB880A6-D8FF-11CF-9377-00AA003B7A11}\ Implemented Categories\ {7DD95802-9882-11CF-9FA9-00AA006C42C4}

Spaces in the keys listed above were added to improve HTML formatting and are not in the actual registry keys.

Only one of the two changes need to be made in order to prevent the exploitation of this vulnerability. Either of these changes will result in additional warning dialogs when a user opens compiled help files with references to the HHCtrl control, even if the help file is part of legitimate locally installed software.

Avoid accessing filesystems writable by untrusted users.

Because of the difficulty in implementing this solution correctly, the CERT/CC does not recommend relying on this solution. You may want to consider this solution only if you can implement it easily or if you have no other viable choices.

Care should be taken with any mechanism that might allow an untrusted user to download or otherwise cause a file to be accessible to the victim. This includes, but is not limited to, network-based file sharing mechanisms (AFS, DFS, Netware, NFS, Windows shares) and mail delivery programs that automatically extract attachments.

Also, if you choose to implement this solution, you need to be especially vigilant in your monitoring of security resources for information about new vulnerabilities that allow attackers to download files to your system. The impact of these vulnerabilities will be greater than if you had selected one of the solutions recommended above.

Appendix A. Vendor Information

The Security Zones feature of Internet Explorer allows you to categorize the web sites you visit and specify what the sites in a particular category should be allowed to do. Since most people visit a small number of familiar, professionally-operated web sites, and it's unlikely that such a site would pose any risk, we recommend putting the sites that you visit frequently and trust into the Trusted Zone. All sites that you haven't otherwise categorized will reside in the Internet Zone. You can then configure the zones to give the appropriate privileges to the web sites in each of these zones.

In addition Microsoft recommends Outlook users install the Outlook Security Update http://www.officeupdate.com/2000/downloaddetails/Out2ksec.htm to protect against mail-borne attacks.

Thanks to Georgi Guninski, who originally discovered this vulnerability and who also provided input used in the development of this advisory.

Cory Cohen was the primary author of this document, with some text by Shawn Hernan.

CERT/CC Contact Information

Email: [email protected]
Phone: +1 412-268-7090 (24-hour hotline)
Fax: +1 412-268-6989
Postal address:

CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh PA 15213-3890
U.S.A.

Using encryption

We strongly urge you to encrypt sensitive information sent by email. Our public PGP key is available from

http://www.cert.org/CERT_PGP.key

Getting security information

http://www.cert.org/

subscribe cert-advisory

* "CERT" and "CERT Coordination Center" are registered in the U.S. Patent and Trademark Office.

Copyright 2000 Carnegie Mellon University.

Revision History

June 19, 2000:  Initial release